1. Long distance APP remote control via WIFI;
2. Support routing mode(AP) and LAN connection mode(STA);
3. Support almost every kind of IC ;
4. With 180 kinds of patterns
5. Support DIY patterns
6. Support up to 2048 pixels;
5. DC5V~24V wide range working voltage
PRODUCT INFORMATION
SP108E WIFI LED Controller Operating Instructions
1. Features:
1. Long distance APP remote control via WIFI; 2. Support routing mode(AP) and LAN connection mode(STA); 3. Support almost every kind of one-wire or two-wire LED driver IC ; 4. Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns; 5.Creatively using from-image-to-effect method for user to DIY any effect; 6. Support setting pixel number and segments number, able to control up to 2048 pixels; 5. DC5V~24V wide range working voltage, preventing reverse connection of power supply; 6. User setting saving;
2.App control:
Both IOS version and Android OS version are available. (hardware should support WIFI) •Requires IOS version 10.0 or later; •Requires Android OS version 4.4 or later; •Search”LedShop”in App Store or Google pay or scan this QR code to download and install the App:
3.Specifications:
Working temperature : -20℃~60℃; Working Voltage : DC5V~24V; Working Current : 20mA~130mA; Remote distance : 30 Meters; Product size : 85mm*45mm*22mm; Product weight : 40g ; Certificates : CE, RoHS;
4.Working Mode and Connecting:
•AP(Access Point) mode: Controller and Phone connect directly, controller works as an access point. Connect steps: 1.When the device is not connected to any WIFI network, power on the controller and wait for 20s and then controller will switch into AP mode ; 2.In the WIFI setting page,find and connect the controller(named like SP108E_xxx, the default pin code is 12345678), 3.Open the LED Shop App ,then the controller will be showed on the device list; •STA(Station) mode: Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly. Connect steps: 1.When the device is not connected to any WIFI network,power on the controller, controller will be remain in Wait-For-Connet mode for 20 seconds; 2.Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button, input the WIFI pin code, then press the OK to confirm and wait for the configure processing finish; 3.When controller successfully enter the WIFI network, it will be showed on the device list; 4.User can select the controller and remove it out of the network by pressing the Remove Device button, then the controller will switch into AP mode.
